Modem Events

Modem Events


Modem Format Standard Events

Below are the Modem codes and their description:
EVENT CODE 
DESCRIPTION
EVENT CODE
DESCRIPTION
EVENT CODE
DESCRIPTION
AUDIO IN
ND14
REBOOT
SI
STATUS DOOR OPEN
ERROR
ND18
RELAY RESET
SL
LOG OVERFLOW
CANCEL
ND19
RELAY SET
SM
CHECKSUM FAIL
ALARM
ND20
RELAY RESET
SO
STATUS OPEN
AD 
DOOR REQUEST DENIED
ND21
RELAY SET
SP
STATUS POWER FAIL
AD01 
LOG OVERFLOW
ND22
RELAY RESET
ST
STATUS TROUBLE
AD12 
CHECKSUM FAIL
ND23
RELAY SET
SU
USER TAMPER
AG 
DOOR CYCLED
ND24
RELAY RESET
SV
STATUS MISSING TROUBLE
AL 
DOOR LOCKED
ND27
SENSOR RESET
SY
STATUS MISSING SUPERVISORY
AO 
DOOR LEFT OPEN
ND28
RELAY SET
SZ
STATUS MISSING
AS 
DOOR SECURE
ND30
CARD ASSIGNED
T
TROUBLE
AU 
DOOR UNLOCKED
ND34
FAIL TO EXECUTE
T9
LOW BATTERY
CLOSING
ND35
FAIL TO EXEXUTE
TB
PHONE LINE 1 FAIL
DURESS
ND38
USER CODE ADDED
TC
PHONE LINE 2 FAIL
FIRE SUPERVISION
O
OPENTD
BUS FAIL
FIRE ALARM
P
AC FAIL
TD01
LOG THRESHOLD
TROUBLE FIRE
R
RESTORE
TD08
RF INTERFERENCE
GM 
MISSING FIRE SUPERVISION
R9
BATTERY RESTORE
TD15
PARAMETER CHECKSUM FAIL
FIRE RESTORAL
RB
PHONE LINE 1 RESTORE
TD16
EXTRA RF POINT
SUPERVISION
RC
PHONE LINE 2 RESTORE
TD26
EXTEND CLOSE TIME
AUDIO DONE
RD
BUS RESTORE
TD29
EQUIPMENT FAIL
MISSING FIRE
RD17
RF RECEIVER RESTORE
TD49
TEST FAILED UPLINK
MT 
MISSING SUPERVISION
RE
TEST REPORT
TE
FAIL TO OPEN/CLOSE
BYPASS OR RESET
RF
FIRE WALK END
TF
FIRE WALK START
NB 
COMM RESTORE
RF01
VALID LOCAL ACCESS
U
USER ALARM
ND02 
PARAMETERS CHANGED
S
CREATE STATUS REPORT
U7
USER ALARM 7
ND03 
USER CODE TAMPER
SA
STATUS ALARM
U9
USER ALARM 9
ND04 
USER CODE CHANGED
SB
LOG THRESHOLD
V
MISSING TROUBLE
ND05 
USER CODE DELETED
SC
STATUS CLOSE
W
FORCED ARM
ND06 
SKED CHANGED
SD
SDI FAILURE
X
RECEIVER MESSAGES
ND07 
DATE & TIME CHANGED
SE
STATUS FIRE SUPERVISION
Y
DIAGNOSTIC REPORT
ND09 
WATCHDOG RESET
SF
STATUS FIRE ALARM


ND11 
REMOTE RESET
SG
STATUS FIRE TROUBLE



These are the general standards.  Overrides by zone would be done on the Comm Format or individual Subscribers. 

    • Related Articles

    • Configuring a Phone Application to Autodial from MKMS

      Step one, select your phone application in Windows. From the Windows Start/Search Menu, search for Default Apps. In Windows 10 select Apps by protocol. (In Windows 11 select Defaults by Link Type) Search for “TEL” and select the phone application you ...
    • What happened? Did my server reboot?

      Sometimes we receive calls from Monitoring Centers that cannot process or receive their alarm signal traffic from their Alarm Receivers.  We're focused on getting the life safety system back up and online as quickly as possible.  If it looks like a ...
    • Operator placing accounts on Test in MKMSCS

      It's often been asked - why is the start time when an operator presses F5 1 hour prior to the actual time?   In the image above, the time of the computer and the time of the virtual machine is reflected by the red circle to the bottom right of the ...
    • Cluster Failover Procedure (MKSCluster.exe)

      Cluster Fail-over Procedure and Recovery When the system is operating normally the servers should be running the following applications. Primary Server (the server actively running the SQL Anywhere Server - database server engine), and Signal ...
    • Employee Rights / Permissions in MKMS (Form Access Rights)

      Setting Employee Permissions ❑Almost every Screen Page (Form) within the Micro Key Millennium Series (MKMS) - whether used for data entry, look-up, or printing a report - also has an associated Form Name. •The associated Form Name may, or may not, be ...